Honeywell MRP-2001, MRP-2001E 1=ADDR, 2=ADDR, 3=ADDR, ANN-BUSMODULES, 2=ANN-80 3=ANN-I/O, ANN-BUSMODULE TYPE 1=NONE, ANN-BUSMODULE TYPE 1=ANN-S/PG 2=ANN-RLY 3=ANN-LED

Programming Master Programming Level

3.5.7.2 ANN-BUS Modules

If an ANN-BUS module is installed, press 2 while viewing ANN-BUS screen #1 to select ANN-BUS addresses for the module(s). The following screen will be displayed.

ANN-BUS MODULES

1=ADDR. 1		NONE
2=ADDR.	2	NONE
3=ADDR.	3	NONE

On Board DACT Screen #1

Pressing the down arrow key will allow the programmer to view additional screens displaying Addresses 1 - 8. Pressing the number corresponding to the desired address will display a screen with technical information about the selected module.

In the technical information screen, pressing 1 for Type will display the following screens:

ANN-BUS MODULE TYPE 1=NONE2=ANN-80 3=ANN-I/O

Module Type Screen #1

ANN-BUS MODULE TYPE 1=ANN-S/PG 2=ANN-RLY 3=ANN-LED

Module Type Screen #2

Press the number corresponding to the module type, if any, that is installed with the selected address. This will enable the module.

72 MRP-2001 & MRP-2001E PN 53040:A 4/16/2007