Manuals / Brands / Portable Media / Clock Radio / Honeywell / Portable Media / Clock Radio

Honeywell MRP-2001, MRP-2001E WARNING, PROCEED, PASSWORD, PASSWORD, 1=YES2=NO, VERIFY NEW, SYSTEM CHANGE, 2=MAINTENANCE, 3.5.10 Clear Program, ENTER NEW FIVE DIGIT, 3.5.11 Password Change

1 136

Download 136 pages, 2.13 Mb

Programming

Master Programming Level

3.5.10 Clear Program

Pressing 1 while viewing Programming Screen #4, will select the Clear Program option. The control panel will provide a warning to the user by prompting with the following display:

PROGRAMMING 1=CLEAR PROGRAM 2=PASSWORD CHANGE

Programming Screen #4

WARNING!SYSTEM CHANGEPROCEED?

1=YES2=NO

Pressing 1 for Yes will cause the control panel to carry out the selected clear option. Pressing 2 for No will prevent programming from being cleared.

3.5.11 Password Change

The factory set passwords, which have been programmed into the control panel, can be changed by selecting the Password Change option. Pressing 2 while viewing Programming Screen #4 will cause the following screen to be displayed:

PASSWORD CHANGE 1=MASTER2=MAINTENANCE

Password Change Screen

Press 1 to change the Master Programming Level password or 2 to change the Maintenance Level password. Note that the passwords will not be displayed on annunciators.

The following screen will appear when either change option is selected:

ENTER NEW FIVE DIGITPASSWORD

Enter Password Screen

A flashing cursor will appear in the center of the display. Enter a new five digit password (such as

10101 for the Master Level). After the fifth digit is entered, the following screen will be displayed:

VERIFY NEW

PASSWORD

Password Change Screen

The new five digit password must be re-entered to accept the change. The display will then return to the initial Password Change Screen.

80	MRP-2001 & MRP-2001E PN 53040:A 4/16/2007

Contents

Deluge • Preaction Control Installation, Operation and Programming Manual Page Page Page Page Page Page Page Page Page SECTION Product Description 1.1Product Features Page 1.2 Specifications 1.3 Controls and Indicators 1.4Components 1.5 Optional Modules and Accessories Installation 2.1 Backbox Mounting Page Page 2.2 Operating Power 2.3 Input Circuits Page 2.4Output Circuits 2.4.2 Special Application DC Power Output Connections 2.4.3 Relays - Programmable 2.5 Power-limitedWiring Requirements 2.6 Installation of Optional Modules Page 2.6.2 4XTMF Municipal Box Transmitter Option Module Page 2.7 ANN-BUSDevices Page Page 2.7.2 ANN-BUSDevice Addressing 2.7.3 ANN-80Remote LCD Annunciator 2.7.4 Specifications 2.7.5 Installation Page Page 2.7.6 ANN-S/PGSerial/Parallel Printer Interface Installation Page 2.7.7 ANN-I/OLED Driver Module Page 2.7.8 ANN-LEDAnnunciator Module Page Page 2.7.9 ANN-RLYRelay Module Page Programming 3.1 User Programming 3.2Initial Power-up 3.3 Programming Screens Description 3.4 Programming and Passwords 3.5 Master Programming Level 3.5.1 FACP CONFIG (Application Templates) FACP CONFIG 1=N/A 2=N/A 3=N/A 1=ENABLED YES 2=TYPE PULL STATION 3=OUTPUT CIRCUIT MAP INPUT ZONE 1 1=NOUN/ADJECTIVE 2=DESCRIPTION ZONE 1 TYPE 1=PULL STATION 2=N/A 3=MANUAL RELEASE Page 1=ALARM NAC 2=WATERFLOW NAC 3=RELEASE 4=SUPV BELL NAC 1=STANDARD ADJECTIVE 2=STANDARD NOUN 1=NORTH 1=3RD 2=SOUTH 2=4TH 3=EAST 1=BASEMENT 1=HVAC RM 2=BOILER RM 2=ISLAND 3=CLASSROOM Page 3.5.3 Output Circuits OUTPUT CIRCUITS 1=OUTPUT 1 2=OUTPUT 2 3=OUTPUT OUTPUT CIRCUITS 1=OUTPUT 1=ENABLED 2=TYPE EDIT OUTPUT # TYPE 1=RELEASE CIRCUIT 1 2=RELEASE CIRCUIT 2 3=ALARM NAC EDIT RELEASE CIR # 1=UNSUPV SHORTS 2=SUPV SHORTS RELEASE STAGES 1=RELEASE 1 ONLY 2=RELEASE 2 ONLY SILENCEABLE 1=SILENCEABLE 2=NON SILENCEABLE 3=SYNC MUTE AUTO SILENCE 1=NO 2=5 MINUTES 3=10 MINUTES AUTO SILENCE 1=15 MINUTES 2=20 MINUTES 3=25 MINUTES AUTO SILENCE 1=30 MINUTES CODING 1=STEADY 2=MARCH TIME 3=CALIFORNIA 1=TEMPORAL 2=FUTURE USE 3=FUTURE USE Page 3.5.4 Cross Input Zones CROSS INPUT ZONES 1=RELEASE 1 GROUPS 2=RELEASE 2 GROUPS REL 1 CROSS GROUPS REL CROSS GROUP 3.5.5 On-BoardRelays ON-BOARDRELAYS 1=RELAY ALARM 2=RELAY SYSTEM SETUP 1=FUTURE USE 2=TIMERS 3=BANNER SYSTEM SETUP 1=TIME-DATE2=TROUBLE REMIND NO 3=CHARGR DISABLE NO TIMERS 1=SOAK 2=SOAK SOAK # TIME 1=ALWAYS ON 2=ENTER MINUTES RANGE 10-30MINUTES WATERFLOW DELAY RANGE 00-90SECONDS AC LOSS DELAY RANGE 00-24HOURS SELECT BANNER 1=FACTORY BANNER 2=USER BANNER FACTORY BANNER PRESS ENTER IF OK USER BANNER-LINE1 TIME AND DATE 1=TIME 2=DATE ENTER TIME AS 12HRS 10:00 1=AM2=PM ENTER DATE MONTH DAY YEAR DAYLIGHT SAVINGS 2=START MONTH MAR 3=START WEEK 1=END MONTH 3.5.7 ANN-BUS 1=BUS ENABLED NO 2=BUS MODULES 3=AUTO CONFIGURE 1=ANN-S/PGOPTIONS 2=ANN-I/OOPTIONS 3=ANN-80OPTIONS 1=ANN-RLYOPTIONS 2=ANN-LEDOPTIONS ANN-BUSMODULES 1=ADDR 2=ADDR 3=ADDR ANN-BUSMODULE TYPE 1=NONE AUTO-CONGFIGURE IN PROGRESS PLEASE WAIT ANN-S/PGOPTIONS 1=PORT Page Page ANN-80OPTIONS 1=PIEZO ENABLE 2=LOCK ENABLE 3=ACK BTN ENABLE ANN-80OPTIONS 1=SIL BTN ENABLE 2=RST BTN ENABLE 3=DRL BTN ENABLE ANN-RLYOPTIONS IN ZONE ZONE 3.5.8 History HISTORY 1=VIEW EVENTS 2=ERASE HISTORY HISTORY 1=VIEW ALL 2=VIEW ALARMS 3=VIEW OTHER EVENTS ERASE HISTORY 3.5.9 Walktest WALKTEST 1=SILENT 2=AUDIBLE 3=VIEW EVENTS 3.5.10 Clear Program WARNING SYSTEM CHANGE PROCEED 3.5.11 Password Change 3.6 Maintenance Programming Level 3.6.1 Input Zones - Enable/Disable POINT PROGRAM 1=ZONE 1 2=ZONE 2 3=ZONE INPUT TYPE PULL STATION 3.6.3 Walktest 3.6.4 Time-Date 1=TIME01:00A 2=DATE 01012006 3=CLOCK FORMAT 12HRS 01:00 Operating Instructions 4.1 Panel Control Buttons 4.2 Indicators 4.3 Normal Operation 4.4 Trouble Operation 4.5 Alarm Operation 4.6Supervisory Operation 4.7 Disable/Enable Operation 4.8 Waterflow Circuits Operation 4.9 2nd-ShotWater Switch 4.10 Detector Functions 4.11 Time Functions: Real-TimeClock 4.12 Coded NAC Operation 4.13 Release Stages 4.14Special System Timers 4.15 Walktest 4.16 Read Status Normal 4.16.3 Output Circuits READ OUTPUTS 1=OUTPUT 1 2=OUTPUT 2 3=OUTPUT READ OUTPUTS 1=OUTPUT 4.16.4 Cross Input Zones CROSS INPUT ZONES 4.16.5 On-BoardRelays ON-BOARD RELAYS RELAY 4.16.6 System Settings 4.16.7 Timers SOAK 0 S 4.16.8 Daylight Savings ENABLED 4.16.9 History 4.16.10 PRINT PRINT 1=HISTORY 2=WALKTEST LOG 3=EXIT PRINTING 4.16.11 ANN-BUS BUS ENABLED NO 1=BUS MODULES 2=ANN-S/PGOPTIONS 1=ANN-80OPTION 2=ANN-RLYOPTIONS 5.1 Overview Power Supply Calculations 5.2Calculating the AC Branch Circuit 5.3Calculating the System Current Draw Page 5.4Calculating the Battery Size APPENDIX A A.1 Input-to-OutputCircuit Mapping and Cross-ZoneOperation A.1.1 Mapping Input Zones to Output Circuits for Direct Activation A.1.2 Mapping Input Zones to Release Circuits for Cross Zone Activation Page A.1.3 Complex Examples of Cross Zoning and I/O Mapping for Release Circuits APPENDIX B B.1 Template 7: Single Hazard - 3 Zone B.2 Template 8: Single Hazard - Cross-ZoneWith Manual Release B.3 Template 9: Dual Hazard - Combined Release B.4 Template 10: Dual Hazard - Split Release B.5 Template 11: Single Hazard - 3 Zones and Low Pressure B.6 Template 12: Single Hazard - 2 Zones Cross-ZonedWith All Active B.7 Template 13: Single Hazard - Dual Zone APPENDIX C Page Page C.1 NFPA 72 Auxiliary Fire Alarm System Page Page C.2 Central Station/Remote Station Transmitter: Connection to FACP Dry Contacts APPENDIX D FACP with Keltron APPENDIX E E.1 Testing E.2 Maintenance Page Page Page Page Page Page Page Page Page Limited Warranty