1

2

3

4

5

ENWW

Duplexer area

This procedure applies only to printers that include a built-in duplexer (HP LaserJet 2300d printer, HP LaserJet 2300dn printer, and

HP LaserJet 2300dtn printer).

1Remove tray 2 from the printer.

2Pull the green lever on the left front of the tray 2 opening to open the paper access plate.

3Reach in and pull out the jammed paper.

4Push the bottom of the paper access plate back up until it clicks into place on both sides (both sides need to be engaged).

5Reinstall tray 2.

6To reset the printer and continue printing, open the top cover all the way and then close it.

Note

If the ATTENTION light does not go out, jammed media remains inside the printer. Check the paper-feed and rear-output areas for jams.

Clearing jams 101