Loading tray 3 (500-sheet tray)

1

2

3

Tray 3 supports only paper (A4 and Letter).

To load tray 3

1Pull the tray out of the printer and remove any paper.

2To adjust for letter-size paper, pull up on the rear paper stop. To adjust for A4-size paper, push the rear paper stop down.

3For letter-size paper, move the side width guides outward as far as possible.

For A4-size paper, move the side width guides inward as far as possible.

4Place the paper in the tray and make sure that it is flat at all four corners. Keep the paper below the hooks on the side and rear of the tray.

5Slide the tray back into the printer.

4

5

34 Chapter 2 Printing tasks

ENWW