HP 2300 Print Quality submenu

Print Quality submenu

Some items on this menu are available in the program or printer driver (if the appropriate driver is installed). Program and printer-driver settings override control panel settings. For more information, see “Using the printer driver” on page 47. In general, it is best to change these settings in the printer driver, if applicable.

The following table lists the settings and possible values. In the Values column, the default value for each setting is the one with an asterisk (*) next to it.

Item	Values	Explanation
SET REGISTRATION	There is no value	Shifts the margin alignment to center the image on the
	to select.	page from top to bottom, and left to right. You can also
		align the image that is printed on the front with the
		image that is printed on the back.
PRINT TEST PAGE	There is no value	Prints a test page to show the current registration
	to select.	settings.
SOURCE	ALL TRAYS	Selects the tray for which you want to print the test
	TRAY 1	page.
	*TRAY 2
	TRAY 3
ADJUST TRAY [N]	-20 to 20 (*0)	Sets the registration for the specified tray, where [N] is
X1 Shift		the number of the tray. A selection appears for each
X2 Shift		tray that is installed, and registration must be set for
Y Shift		each tray.
		X1 SHIFT: Registration of the image on the paper from
		side to side, as the paper lies in the tray. For
		duplexing, this side is the second side (back) of the
		paper.
		X2 SHIFT: Registration of the image on the paper from
		side to side, as the paper lies in the tray, for the first
		side (front) of a duplexed page. This item appears only
		if the printer includes a built-in duplexer
		(HP LaserJet 2300d printer, HP LaserJet 2300dn
		printer, and HP LaserJet 2300dtn printer) and DUPLEX
		is ON (see “DUPLEX” on page 148). Set the X1 SHIFT
		first.
		Y SHIFT: Registration of the image on the paper from
		top to bottom as the paper lies in the tray.

ENWW Configure Device menu 151