HP 2300 Installing memory

Installing memory

1

2

3

4

5

CAUTION

Static electricity can damage DIMMs. When handling DIMMs, either wear an antistatic wrist strap or frequently touch the surface of the DIMM antistatic package, then touch bare metal on the printer.

The HP LaserJet 2300 series printers come with one DIMM installed in slot 1. Do not remove the preinstalled DIMM from slot 1. You can use slot 2 or slot 3 interchangeably for adding DIMMs.

If you have not already done so, print a configuration page to find out how much memory is installed in the printer before adding more memory. See “Configuration page” on page 72.

1After the configuration page is printed, turn the printer off and disconnect the power cord.

2Open the top cover

3Remove the side panel by pressing the release button and sliding the right side panel forward until the alignment arrows line up.

4Pull the panel away from the printer, exposing the available DIMM slots.

5Disconnect all interface cables.

Continued on the next page.

ENWW Installing memory 165