Item | Values | Explanation |
|
|
|
RESOLUTION | 300 |
| 600 |
| *FASTRES 1200 |
| PRORES 1200 |
Selects the resolution. All values print at the same speed.
300: Produces draft print quality and can be used for compatibility with the HP LaserJet III family of printers.
600: Produces high print quality for text and can be used for compatibility with the HP LaserJet 4 family of printers.
FASTRES 1200: Produces
PRORES 1200: Produces
|
| Note |
|
|
| It is best to change the resolution in the program or | |
|
| printer driver. (Program and | |
|
| override control panel settings.) | |
|
|
| |
RET | OFF | Use the Resolution Enhancement technology (REt) | |
| LIGHT | setting to produce print with smooth angles, curves, | |
| *MEDIUM | and edges. | |
| DARK | REt does not affect print quality if the print resolution is | |
|
| ||
|
| set to FastRes 1200. All other print resolutions benefit | |
|
| from REt. |
|
|
| Note |
|
|
| It is best to change the REt setting in the program or | |
|
| printer driver. (Program and | |
|
| override control panel settings.) | |
|
|
| |
ECONOMODE | *OFF | Turn EconoMode ON (to save toner) or OFF (for high | |
| ON | quality). |
|
|
| EconoMode creates | |
|
| the amount of toner on the printed page. | |
|
| Note |
|
|
| It is best to turn EconoMode on or off in the program or | |
|
| printer driver. (Program and | |
|
| override control panel settings.) | |
|
| CAUTION |
|
|
| HP does not recommend | |
|
| If EconoMode is used | |
|
| toner supply will outlast the mechanical parts in the | |
|
| print cartridge. | |
|
|
| |
TONER DENSITY | 1 | Lighten or darken the print on the page by setting the | |
| 2 | toner density. Select a setting ranging from 1 (light) to | |
| *3 | 5 (dark). The default setting of 3 usually produces the | |
| 4 | best results. | |
| 5 |
|
|
|
|
|
|
CREATE CLEANING | There is no value | Press | (SELECT button) to print a cleaning page |
PAGE | to select. | (for cleaning toner from the fuser). Open the | |
|
| rear output bin. Follow the instructions on the cleaning | |
|
| page. For more information, see *“Cleaning the fuser” | |
|
| ||
|
|
| |
PROCESS CLEANING | There is no value | This item is available only after a cleaning page has | |
PAGE | to select. | been created. Follow the instructions printed on the | |
|
| cleaning page. The cleaning process might take up to | |
|
| 2.5 minutes. | |
|
|
|
|
ENWW | Configure Device menu 153 |