9

Select the printer name.

 

10

Click Add Printer.

 

11

Close the Print Center by clicking the close button in the upper-left corner.

 

 

 

Note

 

Some networks might not allow the printer to be set up automatically. You might need to manually

 

 

select the correct PPD when installing the printer.

 

 

Macintosh computers cannot be connected directly to the printer.

 

 

 

 

Installing Macintosh printing system software for direct connections

This section explains how to install the printing system software for Mac OS 8.6 to 9.2.x and Mac OS X.

The Apple LaserWriter driver must be installed to use the PostScript Printer Description (PPD) files. Use the Apple LaserWriter 8 driver that came with your Macintosh computer.

To install the printing system software

1Connect a USB cable between the USB port on the printer and the USB port on the computer. Use a standard 2-meter USB cable. (See “Interface ports” on page 26 for an illustration.)

2Close all software programs that are open or running.

3Insert the printer CD-ROM into the CD-ROM drive and run the installer.

The CD-ROM menu runs automatically. If the CD-ROM menu does not run automatically, double-click the CD-ROM icon on the desktop, and then double-click the Installer icon. This icon is located in the Installer/<language> folder of the Starter CD-ROM (where <language> is your language preference).

4Follow the instructions on the computer screen.

5Restart the computer.

6For Mac OS X: From HD/Applications/Utilities/Print Center, start the Print Center. If the printer does not set up automatically, do the following:

aClick Add Printer.

bFrom within the printer list, select USB as the connection type.

cSelect the printer and then click Add in the lower-left corner.

For Mac OS 8.6 to 9.2.x:

aFrom HD/Applications/Utilities, open the Apple Desktop Printer Utility.

bDouble-click Printer (USB).

cNext to USB Printer Selection, click Change.

dSelect the printer, click Auto Setup, and then click Create.

eOn the Printing menu, click Set Default Printer.

7Print a page from any software program to make sure that the software is correctly installed.

If installation fails, reinstall the software. If this fails, see the installation notes or Readme files on the printer CD-ROM or the flyer that came in the printer box, or go to http://www.hp.com/support/lj2300 for help or more information.

ENWW

Installing the printing system software 19