Figure 6-3

5Separate the rear panel from the main cover, pulling the lower corners away from the printer first. Then, insert the small flathead screwdriver into the openings at the top to pop the upper corners (Figure 6-3, callout 1).

6Remove the cover by grabbing it on both sides and pulling it straight back with a firm pull (Figure 6-3, callout 2).

Back Cover Removal (2 of 2)

To reinstall

Make certain the Input Extender is up.

6 Removal and Replacement

Removal and Replacement 6 - 7

Page 80
Image 80
HP 6L, 5L manual Make certain the Input Extender is up, Back Cover Removal 2