9

10

Figure 6-42

11

C a u t i o n

N o t e

Remove the (7) remaining connectors (Figure 6-42, callout 1).

Remove the screws (5) that secure the DC Controller to the metal case (Figure 6-42, callout 2).

DC Controller Removal (3 of 3)

Remove the DC Controller by lifting gently on the side opposite the formatter, then sliding it out.

Be careful not to rotate the DC Controller as you remove it.

When ordering, the DC Controller does not come with any connectors. Use the current connectors or refer to the connector chart in Chapter 8 for ordering information.

6 - 46 Removal and Replacement