4Remove the wire from the wire guides along the right-side of the printer.

5Disconnect the thermistor feedback connector in the left front side of the Fusing Assembly (Figure 6-15).

Figure 6-15

Heating Element Removal (3 of 3)

6Lift the Heating Element out.

To reinstall

Make sure the connectors are properly reattached.

6 Removal and Replacement

Removal and Replacement 6 - 19

Page 92
Image 92
HP 6L, 5L manual Lift the Heating Element out, Make sure the connectors are properly reattached, Heating Element Removal 3