Formatter PCA

CAUTION ESD SENSITIVE!

CAUTION

Figure 6-43

1Remove the Printer Covers and complete the DC Controller removal direction up to step 8 (Figures 6-40 and 6-41).

2Remove the two cable clips (Figure 6-43, callout 1).

3Remove all (4) screws from the formatter cover (Figure 6-43, callout 2). Lift the I/O shield to remove it.

4If servicing an HP LaserJet 5L or 6L, remove the Control Panel display cable (Figure 6-43, callout 3).

On the HP LaserJet 6L Pro, the Control Panel display cable is connected directly to the Formatter PCA. Do not attempt to disconnect this cable.

5Slide the formatter away from the DC Controller PCA to remove it from the connector.

2

3

1

2

Formatter Board removal

Note

The formatter I/O shield comes in two separate pieces. Be careful to order the correct pieces.

114 Removal and replacement

EN