HP 6L Gold, 6L pro manual Fuser Exit Roller Assembly, 18Fuser Exit Roller removal

Fuser Exit Roller Assembly

1Remove Printer Covers, Delivery Assembly (Figures 6-9 and 6-10), Fuser Pressure Plate (Figure 6-11), and Heating Element (Figures 6-13 through 6-15), Pressure Roller (Figure 6-16), and Face-Up/Face-Down Lever (Figure 6-17).

2Remove the gear from the left end of the roller shaft by pressing down on the catching mechanism with the small flathead screwdriver and pulling the gear away.

3Remove the Exit Roller Assembly by pressing the small, white tab upward (Figure 6-18, callout 1) and rotating it around (Figure 6-18, callout 2).

Note	While the shape of the white tab was changed for the HP LaserJet 6L, these procedures for Fuser Exit
	Roller Assembly removal remain unchanged. Figure 6-18 shows the white tab from an HP LaserJet 5L.
	4 Slide the Exit Roller Assembly forward and out to the right of the printer.

2

1

Figure 6-18Fuser Exit Roller removal

EN Internal assemblies 89