Covers and doors
Back Cover
| 1 | Unplug the power cord and remove the parallel cable from the back of the printer. |
| 2 | Remove the toner cartridge. |
| 3 | Lift the Input Extender assembly. |
|
| |
CAUTION | You must lift the Input Extender when the covers are removed or it will break. After you have removed | |
| the covers, leave the Input Extender in this lifted position for ease of replacement. | |
|
| |
|
| |
Note | The Input Extender for the HP LaserJet 6L Pro differs from the one shown in the photo. It does not | |
| have the extra extender for | |
| 4 | Remove the (3) screws (Figure |
|
1
Figure 6-2 Back Cover removal (1 of 2)
EN | Covers and doors 73 |