Site requirements
Operating environment
The environmental requirements listed in the table below must be maintained to ensure the proper operation of this printer.
Table
LaserJet 5L/6L/6L Pro & Cartridge | Operating | Storage |
|
|
|
Temperature | 50 to 90.5° F (10 to 32.5° C) | 32 to 104° F (0 to 40° C) |
|
|
|
Humidity | 20 to 80% RH | 10 to 80% RH |
| (with no condensation) | (with no condensation) |
|
|
|
Consider the following points before installing the printer:
lInstall in a well-ventilated, dust-free area.
lInstall on a hard, flat and continuous surface, with all four printer feet level. Do not install on carpet or other soft surfaces.
lEnsure adequate power is supplied. Printer power requirements are listed under “Specifications” in Chapter 1. Uninterruptible power supplies (UPS) should not be used with this printer.
lInstall away from direct sunlight, open flames, or ammonia fumes. If the printer is placed near a window, make sure the window has a curtain or blind to block any direct sunlight.
lInstall with enough space around the printer for proper access and ventilation. (See Figure
lInstall printer away from the direct flow of exhaust from air ventilation systems.
32 Site requirements | EN |
