5Separate the rear panel from the main cover, pulling the lower corners away from the printer first. Then, insert the small flathead screwdriver into the openings at the top to pop the upper corners (Figure 6-3, callout 1).

6Remove the cover by grabbing it on both sides and pulling it straight back with a firm pull (Figure 6-3, callout 2).

1

2

Figure 6-3Back Cover removal (2 of 2)

To reinstall

Make certain the Input Extender is raised before you reinstall the back cover.

74 Removal and replacement

EN

Page 76
Image 76
HP 6L pro, 6L Gold manual To reinstall, 3Back Cover removal 2