Paper Exit Sensor Flag

1Remove the Printer Covers, Delivery Assembly (Figures 6-9 and 6-10), and Fuser Pressure Plate (Figure 6-11).

CAUTION Before proceeding to Step 2, examine the Paper Exit Sensor flag. It is important to note the position of the spring mechanism on the flag. The spring must be reinstalled to exactly this position.

2Remove the Paper Exit Sensor flag by pressing down on the left side and pulling up on the right side.

 

To reinstall

 

 

Note

It is important that you reinstall the flag correctly, because installing it incorrectly will cause the Control

 

Panel to display an error with the Paper Exit Sensor (PS201).

 

Place the left side of the flag in the correct position first, then slide the right side into place, making

 

 

certain the spring is on top of the flag (Figure 6-19). If the spring exerts no pressure on the flag, it

 

may require “re-springing” by giving the spring an extra turn before reinstalling. The flag should fit

 

snugly in place.

Figure 6-19Paper Exit Sensor Flag replacement

90 Removal and replacement

EN