Transfer Roller Guide and Transfer Roller

1Remove the Printer Covers, Pickup Roller Assembly (Figures 6-23 through 6-25), and Paper Feed Frame (Figures 6-26 through 6-29).

2Looking at the back of the printer, note the two small, hook-shaped release tabs on each end of the Transfer Roller guide. Using a small, flathead screwdriver, carefully pry each tab outward to release it (Figure 6-30).

3Roll the released portion of the guide up. To remove the Transfer Roller Guide, pull it off each end of the Transfer Roller shaft.

Figure 6-30Transfer Roller Guide and Transfer Roller removal (inside/back view)

4This exposes the Transfer Roller.

WARNING! Do not touch the Transfer Roller or otherwise allow it to be contaminated.

5Working from the front of the printer, gently pry the gear side of the Transfer Roller out first, then slide the other side out of its socket.

To reinstall

Some of the HP LaserJet 5L Printers contain a small metal spring under the Transfer Roller Guide. Upon reinstallation with these models, the small metal spring should rest under the Transfer Roller Guide.

EN

Top assemblies 101