Hood sensor
The hood sensor is located on the bottom left of the computer (when viewed from behind). Figure
To remove the hood sensor:
1.Prepare the computer for disassembly (see Preparing to disassemble the computer on page 27).
2.Prepare the computer for disassembly (see Preparing to disassemble the computer on page 27).
3.Remove the access panel (see Access panel on page 34).
4.Remove the stand (see Stand on page 36).
5.Remove the lower panel (see Lower panel on page 38).
6.Remove the side panels (see Side panels on page 76).
7.Remove the metal plate (see Metal plate on page 39).
8.Remove the power supply (see Power supply on page 78).
9.Remove the system board (see System board on page 81).
10.Remove the front bezel (see Front bezel on page 92).
11.Remove the display panel (see Display panel on page 97).
12.Disconnect the hood sensor cable from the system board connector labeled HSENSE.
Hood sensor 103