HP 8300 C5J37AWABA, 8300 D0K72US#ABA manual Bios

Table 8-1Numeric Codes and Text Messages (continued)

Control panel message	Description	Recommended action
2204-Inventory error during MEBx execution	BIOS information passed to the MEBx	1.	Reboot the computer.
	resulted in a failure.	2.	If the error persists, update to the latest
			BIOS version.
		3.	If the error still persists, replace the
			system board.
2205-Interface error during MEBx execution	MEBx operation experienced a hardware	1.	Reboot the computer.
	error during communication with ME.	2.	If the error persists, update to the latest
			BIOS version.
		3.	If the error still persists, replace the
			system board.
2211-Memory not configured correctly for	DIMM1 or XMM1 is not installed.	Make sure there is a memory module in the
proper MEBx execution.		black DIMM1 socket and that it is properly
		seated.
2212-USB Key Provisioning failure writing to	USB device used for USB key provisioning	1.	Try a different USB key device for
device	will not allow BIOS to update provision file		provisioning.
	properly.	2.	If the error persists, update to the latest
			BIOS version and ME firmware
			version.
		3.	If the error still persists, replace the
			system board.
2217-ME Firmware Version request failure	ME firmware is not properly responding to	1.	Reboot the computer.
	BIOS query for version information.	2.	If the error persists, update to the latest
			BIOS version and ME firmware
			version.
		3.	If the error still persists, replace the
			system board.
2218-ME Firmware Version should be	ME firmware must be updated to match	1.	Update to the latest ME firmware
updated	current functionality contained in the system		version.
	BIOS.	2.	If the error persists and system BIOS
			has been recently updated, restore
			previous system BIOS version.
		3.	If the error still persists, replace the
			system board.
2219-USB Key Provisioning file has invalid	Provisioning file contained on the USB key	1.	Recreate the provisioning file using
header identifier	has been corrupted or is not a valid version		third party management console
	for the current ME firmware.		software.
		2.	If the error persists and system BIOS
			has been recently updated, restore
			previous system BIOS version.
			Otherwise, update the ME firmware
			version.
		3.	If the error still persists, replace the
			system board.

140 Chapter 8 POST Error Messages