HP 8300 D0K72US#ABA, 8300 C5J37AWABA manual Wlan module, To remove the mSATA SSD

To remove the mSATA SSD:

1.Prepare the computer for disassembly (see Preparing to disassemble the computer on page 27).

2.Remove the access panel (see Access panel on page 34).

3.Remove the two Phillips screws that secure the SSD to the computer.

4.Lift the SSD to a 45-degree angle, and then pull it away to remove it from the socket.

To install the mSATA SSD, reverse the removal procedures.

NOTE: mSATA SSD are designed with a notch to prevent incorrect insertion.

WLAN module

The WLAN module is located on the left side of the system board. The module is secured with one Phillips screw and has two connected antennas.

NOTE: The procedure to replace the WLAN module must be performed by an HP technician.

Figure 6-56WLAN module location

To remove the WLAN module:

1.Prepare the computer for disassembly (see Preparing to disassemble the computer on page 27).

2.Remove the access panel (see Access panel on page 34).

3.Remove the stand (see Stand on page 36).

WLAN module 69