3.Insert the wireless receiver into a USB 2.0 port on the computer.

NOTE: Insert the wireless receiver into a USB 2.0 port that is separated from USB 3.0 devices.

Figure 6-9Installing the wireless receiver

4.Make sure the Power switch on the bottom of the mouse is in the On position.

5.Press and release the Connect button on the bottom of the mouse. The blue activity LED from the wireless receiver illuminates when the synchronization command has been received and turns off when synchronization is complete.

6.Press and release the Connect button on the bottom of the keyboard. The blue activity LED from the wireless receiver illuminates when the synchronization command has been received and turns off when synchronization is complete.

Figure 6-10Synchronizing the wireless keyboard and mouse

NOTE: If the procedure does not work, remove and then reinsert the wireless keyboard and mouse receiver from the back of the computer and then synchronize the keyboard and mouse again. If synchronization still does not work, remove and replace the batteries.

Synchronizing the optional wireless keyboard or mouse 33

Page 41
Image 41
HP 8300 D0K72US#ABA, 8300 C5J37AWABA manual