If all these elements are properly installed and configured, use the IR test tool to test the IrDA protocol transmission and device operation. This tool for troubleshooting IR communication problems, shown in Figure 10, has been developed by Genoa Technology, Inc., in cooperation with Hewlett-Packard. The part number is 5062-4661 and can be ordered through HP Parts Direct Ordering.

The IR test tool can be used with any IrDA-compliant primary or secondary device, regardless of manufacturer.

IR Diodes

Test Connect Pass

LB

Peripheral Computer

Test Test

Test Modes

PCL Printer

PostScript Printer

Energy Detect

Test Frame

Figure B-8 Infrared Test Tool

To test the peripheral device:

1 Put the HP LaserJet 5 in Ready Mode.

2 Press the “Peripheral Test” button on the test tool. The LEDs on the test tool will sequence.

If the “PASS” LED lights, the test was successful, indicating that communication with the printer’s IR port is functioning normally.

LaserJet 5/5M/5N Printer B-39