HP ew2500 802.11b/g Print Server manual Mac OS network installation, Novell-supplied software

Windows XP/Server 2003 or 2008 integrated software

You can use the IPP client software integrated with the Windows system. The IPP implementation on the HP Jetdirect print server is compatible with the Windows system IPP client software.

To set up a print path to an HP Jetdirect-connected Internet printer using the Windows XP IPP client software, use the following steps:

1.Click Start, and then click Printers and Faxes.

2.Run the Add Printer wizard (click Add a printer), and then click Next.

3.Select the option for a Network printer and then click Next.

4.Select Connect to a printer on the Internet and enter the print server's URL, as in the following example:

http:// <IP_address> [/ipp/port#]

In the example, <IP_address> is the IPv4 address configured on the HP Jetdirect print server and [/ipp/port#] identifies the port number, which is port 1 for single-port print servers (default is /ipp/port1).

Example:

http://192.160.45.40 An IPP connection to an HP Jetdirect print server with IPv4 address 192.160.45.40. (“/ ipp/port1” is assumed and not required.)

NOTE: For a Secure IPP connection, replace http:// with https:// in the URL string above.

Click Next.

5.Provide the printer driver. (The HP Jetdirect print server does not contain drivers. You might need the printer CD-ROM to install the driver.)

6.Click OK to install the printer driver and then follow the on-screen instructions.

Novell-supplied software

The HP Jetdirect print server is compatible with IPP running on NetWare 5.1 with SP1 or later. For NetWare client support, see your NetWare technical documentation or contact Novell.

Mac OS network installation

Software tools

Use the following Mac OS software tools:

Mac OS network installation 11