HP ew2500 802.11b/g Print Server manual Proxy Server, Proxy Port, Frame Type, AppleTalk Enable

Table C-1HP Jetdirect EIO Menu on Graphical Control Panel (continued)

Menu item	Sub-menu item	Sub-menu item	Values and Description
	Proxy Server		Proxy server to use by embedded applications in the
			device. A proxy server is typically used by network
			clients for Internet access. The proxy server caches
			Web pages and provides a degree of Internet
			security.
			Enter its IPv4 address or FQDN (up to 255 octets).
			Contact your ISP for the proxy server address, when
			required.
	Proxy Port		Port number used by the proxy server for client
			support. This port is reserved for proxy activity on your
			network, and can be a value from 0 to 65535.
IPX/SPX	Enable		Off: Disable the IPX/SPX protocol.
			On: Enable the IPX/SPX protocol.
			NOTE: The factory default setting depends on the
			print server model.
	Frame Type		Frame-type setting for your network.
			Auto: Sense all types and configure the first one
			detected.
			EN_8023, EN_II, EN_8022, and EN_SNAP: Frame-
			type selections for Ethernet networks
AppleTalk	Enable		Off: Disable the AppleTalk protocol.
			On: Enable the AppleTalk protocol.
			NOTE: The factory default setting depends on the
			print server model.
DLC/LLC	Enable		Off: Disable the DLC/LLC protocol.
			On: Enable the DLC/LLC protocol.
			NOTE: The factory default setting depends on the
			print server model.
Security	Print Sec Page		Yes: Print the current IPsec security settings.
			No (default): Do not print the current settings..
			NOTE: Displays only if IPsec is supported on the
			print server.
	Secure Web		Require encrypted communication between a browser
			and the HP Embedded Web Server.
			HTTPS Required: Only HTTPS access is accepted. The
			print server appears as a secure site.
			HTTP/HTTPS Optional: Access using either HTTP or
			HTTPS.
			NOTE: The factory default setting depends on the
			print server model.

180 Appendix C HP Jetdirect control panel menus (V.40.xx)