HP ew2500 802.11b/g Print Server manual Network Statistics, TCP/IP protocol information

Table 8-5 Security Settings (continued)

Message	Description
JD Config Changes Poll Interval	Number of hours to wait before checking the assessment server for device
	configuration changes.
Primary Address/Host Name	IP address or host name of the primary assessment server.
Primary Port	Port number of the primary assessment server.
Backup Address/Host Name	IP address or host name of the backup assessment server.
Backup Port	Port number of the backup assessment server.

Network Statistics

Information in this section of the HP Jetdirect configuration page is described in Table 8-6 Network Statistics on page 144.

Table 8-6 Network Statistics

Message	Description
TOTAL PACKETS RECEIVED	Total number of frames (packets) received by the HP Jetdirect print server without error.
	Includes broadcast, multicast packets, and packets specifically addressed to the print
	server. Does not include packets specifically addressed to other nodes.
UNICAST PACKETS RECEIVED	Number of frames specifically addressed to this HP Jetdirect print server. Does not
	include broadcasts or multicasts.
BAD PACKETS RECEIVED	Total number of frames (packets) received with errors by the HP Jetdirect print server.
TOTAL PACKETS TRANSMITTED	Total number of frames (packets) transmitted without error.

TCP/IP protocol information

Information in this section of the HP Jetdirect configuration page is described in the following table. For general TCP/IP configuration parameters, see Table 8-7 TCP/IP configuration information

on page 144. For IPv4 parameters, see Table 8-8 IPv4 Section on page 145. For IPv6 parameters, see Table 8-9 IPv6 Section on page 147. For error messages, see Table 8-14 Error messages

on page 150.

Table 8-7 TCP/IP configuration information

Message	Description
IPv4	Status of IPv4 and IPv6 protocols on the print server:
and	Enabled Protocol is active.
IPv6	Disabled Protocol is inactive.
HOST NAME	Host name configured on the print server. It might be truncated.
	Not Specified Host name not specified in a BOOTP response or TFTP configuration file.
	NPIxxxxxx Default name is NPIxxxxxx, where xxxxxx represents the last six digits of the
	LAN hardware (MAC) address.

144 Chapter 8 HP Jetdirect configuration pages