HP ew2500 802.11b/g Print Server Printing, Ftp-printing, Ipp-printing, Lpd-printing, Interlock

Table 3-3Telnet Commands and Parameters (continued)

TCP/IP Print Options

9100-printing	Print to TCP port 9100 on the print server.
	0: Disable.
	1	(default): Enable.
ftp-printing	Print through FTP (TCP ports 20, 21).
	0	Disable.
	1	(default): Enable.
ws-printing	Print through WS.
	0	(default): Disable.
	1: Enable.
ipp-printing	print using IPP (TCP port 631).
	0	Disable.
	1	(default): Enable.
lpd-printing	Print using LPD (TCP port 515).
	0	Disable.
	1	(default): Enable.
banner	Print an LPD banner page.
	0	Disable.
	1	(default) Enable.
ipp-job-acct	Use job accounting for IPP printing.
	0	Disable.
	1	(default): Enable.
interlock	Require an acknowledgement (ACK) on all TCP packets before the printer can close a port
	9100 print connection. Specify a port number and parameter value. For the
	HP Embedded Web Server on the HP Jetdirect print server, the default port number is 1. In
	the following example, the port is 1 and interlock is enabled:
	interlock 1 1
	0	(default): Disable interlock.
	1: Enable.
mult-tcp-conn	Allow multiple TCP connections (restrict the use of multiple ports).
	0	(default): Enable multiple connections.
	1: Disable multiple connections (allow only one connection).
buffer-packing	Pack the data buffer on TCP/IP packets before sending.
	0	(default): Enable. Pack the data buffer before sending to the printer.
	1: Disable. Data is sent to the printer as it is received.

IPv4 configuration 49