HP ew2500 802.11b/g Print Server manual Table C-1HP Jetdirect EIO Menu on Graphical Control Panel

Models: ew2500 802.11b/g Print Server

1 206
Download 206 pages 49.02 Kb
Page 188
Image 188

Table C-1HP Jetdirect EIO Menu on Graphical Control Panel (continued)

Menu item

Sub-menu item

Sub-menu item

Values and Description

 

 

 

 

 

IPv4 Settings

Config Method

How TCP/IPv4 parameters are configured on the

 

 

 

HP Jetdirect print server.

 

 

 

BootP: Automatic configuration from a BootP server.

 

 

 

DHCP (default): Automatic configuration from a

 

 

 

DHCPv4 server. If a DHCP lease exists, use the DHCP

 

 

 

Release and DHCP Renew menus to set DHCP lease

 

 

 

options.

 

 

 

Auto IP: Automatic link-local IPv4 addressing. An

 

 

 

address in the form 169.254.x.x is assigned

 

 

 

automatically.

 

 

 

Manual: Manually configure TCP/IP4, using the

 

 

 

Manual Settings menu.

 

 

 

 

 

 

DHCP Release

Displays if Config Method is set to DHCP and a DHCP

 

 

 

lease exists for the print server.

 

 

 

No (default): Current DHCP lease is saved.

 

 

 

Yes: Current DHCP lease and the leased IP address

 

 

 

are released.

 

 

 

 

 

DHCP Renew

 

Displays if Config Method is set to DHCP and a DHCP

 

 

 

lease exists for the print server.

 

 

 

No (default): Print server does not request to renew the

 

 

 

DHCP lease.

 

 

 

Yes: Print server requests to renew the current DHCP

 

 

 

lease.

 

 

 

 

 

 

Manual Settings

Available if Config Method is set to Manual. You can

 

 

 

set the following from the printer control panel:

 

 

 

IP Address: Printer IP address.

 

 

 

Subnet Mask: Printer subnet mask.

 

 

 

Syslog Server: IP address of the syslog server used to

 

 

 

receive and log syslog messages.

 

 

 

Default Gateway: IP address of the gateway or router

 

 

 

used for communications with other networks.

 

 

 

Idle Timeout: Time, in seconds, after which an idle TCP

 

 

 

print data connection is closed.

 

 

 

 

 

 

Default IP

Default IP address to use if the print server is unable to

 

 

 

obtain an IP address from the network during a forced

 

 

 

TCP/IP reconfiguration. (For example, when manually

 

 

 

configured to use BootP or DHCP.)

 

 

 

Auto IP: Link-local IP address 169.254.x.x is set.

 

 

 

Legacy: 192.0.0.192 is set, consistent with older

 

 

 

HP Jetdirect devices.

 

 

 

 

178 Appendix C HP Jetdirect control panel menus (V.40.xx)

Page 188
Image 188
HP ew2500 802.11b/g Print Server manual Table C-1HP Jetdirect EIO Menu on Graphical Control Panel