HP ew2500 802.11b/g Print Server manual Current IPsec status

Table 8-15General Information (continued)

Message	Description
IPsec	Current IPsec status.
	Enabled Enabled and operating as configured.
	Disabled Turned off.
	Policy Failed Print server failed to implement the IPsec policy. You might need to reset
	security (using the control panel or the HP Embedded Web Server), or perform a cold
	reset of the print server.
Admin Password	IP Administrator password is configured on the print server. This password is shared by
	Telnet, the HP Embedded Web Server, and HP Web Jetadmin to control access to print
	server configuration parameters. (Consists of up to 16 alphanumeric characters.)
	Not Specified Password is not set.
	Set Password is set.
	Clear the password using a cold reset.
Cert Expires	Expiration date of the digital certificate for SSL/TLS encrypted security. The date is in
	UTC format (for example, 2012-10-02 12:45 UTC).
	Not Applicable Digital certificate is not installed.
SNMP Versions:	SNMP versions enabled on the print server.
	Disabled All versions are disabled. No SNMP access is allowed.
	1;2 SNMP v.1 and SNMP v.2c supported, and SNMP v.3 is disabled, or not
	supported.
	1;2;3-na/npSNMP v.1, v.2c, and v.3 are enabled. v.3 is enabled with the minimum
	security of no authentication (na) and no privacy (np).
	1;2;3-a/npSNMP v.1, v.2c, and v.3 are enabled. v.3 is enabled with the minimum
	security of authentication enabled (a) but no privacy (np).
	1;2;3-a/pSNMP v.1, v.2c, and v.3 are enabled. v.3 is enabled with the minimum
	security of authentication (a) with privacy (p) enabled.
	3-na/npSNMP v.1 and v.2c are disabled. SNMP v.3 is enabled with the minimum
	security of no authentication (na) and no privacy (n).
	3-a/npSNMP v.1 and v.2c are disabled. SNMP v.3 is enabled with the minimum
	security of authentication enabled (a) but no privacy (np).
	3-a/pSNMP v.1 and v.2c are disabled. SNMP v.3 is enabled with the minimum
	security of authentication (a) with privacy (p) enabled.
SNMP Set Cmty Name	SNMP set community name is set on the HP Jetdirect print server. An SNMP set
	community name is a password for write access to SNMP control functions (SNMP
	SetRequests) on the HP Jetdirect print server.
	Not Specified Set community is not set.
	Specified Set community is set.

HP Jetdirect Security page 159