HP ew2500 802.11b/g Print Server manual Snmp Versions, Snmp Set Cmty Name, Snmp Get Cmty Name

Table 8-5 Security Settings (continued)

Message	Description
SNMP Versions	SNMP versions enabled on the print server.
	Disabled All SNMP versions disabled. No SNMP access is allowed.
	1;2 SNMP v.1 and SNMP v.2c supported. SNMP v.3 is disabled, or not supported.
	1;2;3-na/npSNMP v.1, v.2c, and v.3 enabled. v.3 is enabled with the minimum
	security of no authentication (na) and no privacy (np).
	1;2;3-a/npSNMP v.1, v.2c, and v.3 enabled. v.3 is enabled with the minimum
	security of authentication enabled (a) but no privacy (np).
	1;2;3-a/pSNMP v.1, v.2c, and v.3 enabled. v.3 is enabled with the minimum security
	of authentication (a) with privacy (p) enabled.
	3-na/npSNMP v.1 and v.2c disabled. SNMP v.3 is enabled with the minimum security
	of no authentication (na) and no privacy (np).
	3-a/npSNMP v.1 and v.2c disabled. SNMP v.3 is enabled with the minimum security
	of authentication enabled (a) but no privacy (np).
	3-a/pSNMP v.1 and v.2c disabled. SNMP v.3 is enabled with the minimum security
	of authentication (a) with privacy (p) enabled.
SNMP Set Cmty Name	SNMP set community name is configured on the HP Jetdirect print server. An SNMP set
	community name is a password for write access to SNMP control functions (SNMP
	SetRequests) on the HP Jetdirect print server.
	Not Specified SNMP set community name is not set.
	Specified User-specified SNMP set community is set.
SNMP Get Cmty Name	SNMP get community name is configured on the HP Jetdirect print server. This is a
	password to determine which SNMP GetRequests the HP Jetdirect print server responds
	to. If a Get community name is set, the print server responds to either a user specified
	community name or the factory-default.
Access List	(IPv4 only) Access control list is set on the HP Jetdirect print server. The list specifies the
	IP address of individual systems, or IP network of systems, that are allowed access to
	the print server and device.
	Specified Host access list is set.
	Not Specified Host access list is not set. All systems are allowed access.
Secure Web Configuration	Use encrypted communications between a browser and the HP Embedded Web
	Server.
	Optional (HTTPS/HTTP) Allows un-encrypted communication using standard HTTP ports,
	as well as encrypted communications using HTTPS.
	HTTPS Required Allow only encrypted communications on HTTPS.
Assessment	When enabled (the default), print servers attempting connection to network resources
	must be in full compliance with corporate governance policy.
Assessment State	Indicates whether assessment is Enabled or Disabled.
DHCP Enforcement	Use DHCP as the transport method for moving assessment data.
802.1X Enforcement	Use 802.1X to transport assessment data.
Policy Changes Poll Interval	Number of days to wait before checking the assessment server for changes.

HP Jetdirect configuration page 143