HP ew2500 802.11b/g Print Server manual Bonjour Domain Name, Ftp-download

Table 3-3Telnet Commands and Parameters (continued)

bonjour-svc-name	Bonjour service name. This name is persistent and is used to resolve a particular device or
	service if socket information (such as the IP address) changes from session to session.
	Apple Bonjour displays this service. The default service name is the printer model and the
	LAN hardware (MAC) address. Enter up to 64 alphanumeric characters.
Bonjour Domain Name	(Read only.) Bonjour domain name assigned to the device, in the form <host name>.local.
	If a user-specified host name is not assigned, the default host name NPIxxxxxx is used,
	where xxxxxx are the last 6 digits of the LAN hardware (MAC) address.
bonjour-pri-svc	Highest priority Bonjour service to use for printing. Set this parameter using the following
	values:
	1: Port 9100 printing
	2: IPP port printing
	3: Default LPD raw queue
	4: Default LPD text queue
	5: Default LPD auto queue
	6: Default LPD binps (binary PostScript) queue
	7 through 12: If user-specified LPD queues are defined, corresponds to user-specified LPD
	queues 5 through 10.
	Although the default selection depends on the printer, it is typically Port 9100 printing or
	LPD binps.
ftp-download	Download firmware upgrade files to the print server, using FTP.
	0: Disable.
	1 (default): Enable.
ttl-slp	IP multicast time-to-live (TTL) setting for SLP packets. The default value is 4 hops (the
	number of routers from the local network). Set from 1 to 15 hops.
	-1: Disable.
	4 (default): Enable multicast TTL.
ipv4-multicast	Receive and transmit IP version 4 multicast packets by the print server.
	0: Disable.
	1 (default): Enable.
	NOTE: If disabled, other protocols that use multicast protocols, such as Bonjour and
	SLP, might also be disabled without notification.
idle-timeout	Seconds that an idle print data connection can remain open. Set from 1 to 3600 seconds.
	0: Disable. Connection does not terminate. Other hosts cannot make a connection.
	270 (default): Enable.

52 Chapter 3 TCP/IP configuration