HP Jetdirect Security | HP ew2500 802.11b/g Print Server specification

Table 8-14Error messages (continued)

Error Code and Message	Description

64 INVALID PASSWORD	An invalid password was specified through TFTP. Verify that the password consists of a
	maximum of 16 printable characters.

65 DOWNLOAD NOT ALLOWED	This print server does not allow firmware upgrade over a wireless network connection.
ON WIRELESS

83 DISCONNECTING FROM	Server shut down because of a configuration change or reset request. This message
SERVER	automatically clears after a few seconds, unless the printer is offline, is in an error
	state, or is servicing another I/O port or another network protocol.

84 DHCP LEASE TIMERS ADJUSTED	The print server detected a DHCP lease error due to one of the following conditions:
	● Renew time is less than 30 seconds.
	● Rebind time is less than 52 seconds.
	● Rebind time is less than, or equal to, the Renew time.
	● Lease duration is less than, or equal to, the Rebind time.

F1 TRYING TO CONNECT TO	The HP Jetdirect print server is attempting connection to the NetWare server(s). This is a
SERVER	normal message. Wait until the connection is established or another status message
	appears.

F2 TFTP IN PROGRESS	The print server is attempting to use TFTP to obtain TCP/IP configuration settings over
	the network.

F3 BOOTP/RARP IN PROGRESS	The print server is attempting to use BootP or RARP to obtain TCP/IP configuration
	settings over the network.

F4 BOOTP/DHCP IN PROGRESS	The print server is attempting to use BootP or DHCP to obtain TCP/IP configuration
	settings over the network.

HP Jetdirect Security page

If the HP Jetdirect print server supports IPsec, you can print an enhanced Security page from the HP Jetdirect menu that is accessed through the printer control panel. The following figure shows a typical Security page:

NOTE: This section describes a typical security page. The actual security page content depends on the HP Jetdirect product and the firmware version.

To print the HP Jetdirect Security Page:

1.On the printer control panel, navigate to the HP Jetdirect menus.

2.In the HP Jetdirect menus, locate and select the Security menu item.

3.In the Security menu, locate and select Print Sec Page. (This option is displayed only if IPsec is supported by the print server.)

4.Click Yes to print the security page.

HP Jetdirect Security page 157

ew2500 802.11b/g Print Server specifications

The HP ew2500 802.11b/g Print Server is a versatile printing solution designed to streamline the printing process within a wireless network environment. Specifically geared towards small to medium-sized offices, this print server provides seamless integration for various printers and enhances accessibility across multiple devices.

One of the main features of the HP ew2500 is its adherence to the 802.11b/g wireless standards, offering high-speed wireless connectivity with a maximum data rate of up to 54 Mbps. This ensures efficient data transmission, allowing users to print from anywhere within the wireless range without the hassle of tangled cables or limited port access. The print server supports both infrastructure and ad-hoc wireless networking modes, making it flexible for diverse networking environments.

Another notable characteristic of the ew2500 is its compatibility with various printer types, including inkjet, laser, and all-in-one printers. This compatibility is essential for organizations that utilize different printer brands and models, facilitating a centralized printing solution. Additionally, the server is equipped with an Ethernet port, providing the option for wired connectivity, which can be beneficial for situations where wireless performance might be compromised.

The HP ew2500 is designed with user-friendly features. The easy setup process allows users to configure the server using a straightforward web interface, which can be accessed from any network-enabled device. This simplicity reduces the time required for installation and eliminates the need for extensive technical knowledge.

Security is another critical aspect of the HP ew2500's functionality. The print server supports robust encryption protocols, including WEP and WPA, ensuring that data transmitted over the network remains secure from unauthorized access. This feature is particularly important in office environments where sensitive information may be printed frequently.

Overall, the HP ew2500 802.11b/g Print Server is an efficient and reliable solution for enabling wireless printing capabilities in a business setting. Its combination of high-speed wireless connectivity, broad printer compatibility, user-friendly setup, and essential security features makes it an excellent choice for organizations looking to enhance their printing infrastructure. Whether in an office or a home environment, the ew2500 provides the functionality and convenience necessary to meet modern printing demands efficiently.

HP ew2500 802.11b/g Print Server manual HP Jetdirect Security

Models: ew2500 802.11b/g Print Server

Table 8-14Error messages (continued)

Error Code and Message

64 INVALID PASSWORD

SERVER

84 DHCP LEASE TIMERS ADJUSTED

SERVER

F2 TFTP IN PROGRESS

F3 BOOTP/RARP IN PROGRESS

F4 BOOTP/DHCP IN PROGRESS

HP Jetdirect Security page

To print the HP Jetdirect Security Page:

ew2500 802.11b/g Print Server specifications