HP ew2500 802.11b/g Print Server Execute, Ping Test, Dest Type, Dest IPv4, Dest IPv6, Packet Size

Table C-1HP Jetdirect EIO Menu on Graphical Control Panel (continued)

Menu item	Sub-menu item	Sub-menu item	Values and Description
		Execute	No (default): Do not run the selected tests.
			Yes: Run the selected tests.
	Ping Test		Test network communications. Sends link-level packets
			to a remote network host, then waits for an
			appropriate response.
		Dest Type	Target device is an IPv4 or IPv6 node.
		Dest IPv4	The IPv4 address.
		Dest IPv6	The IPv6 address.
		Packet Size	Size of each packet, in bytes, sent to the remote host.
			The minimum is 64 (default) and the maximum is
			2048.
		Timeout	Length of time, in seconds, to wait for a response from
			the remote host. The default is 1 and the maximum is
			100.
		Count	Number of ping test packets to send. Select a value
			from 1 to 100. Enter zero (0) to run the test
			continuously.
		Print Results	Print the test results (if not running continuously).
			Yes: Print the results.
			No (default): Do not print the results.
		Execute	Run the ping test.
			No (default): Do not run the test.
			Yes: Run the test
	Ping Results		View the ping test status and results, using the control
			panel display.
		Packets Sent	Number of packets (0 - 65535) sent to the remote host
			since the most recent test was initiated or completed.
		Packets Received	Number of packets (0 - 65535) received from the
			remote host since the most recent test was initiated or
			completed.
		Percent Lost	Percent of sent ping test packets without a response
			from the remote host since the most recent test was
			initiated or completed.
		RTT Min	Minimum detected round trip time (RTT), from 0 to
			4096 milliseconds, for packet transmission and
			response.
		RTT Max	Shows the maximum detected round trip time (RTT),
			from 0 to 4096 milliseconds, for packet transmission
			and response.

Graphical control panel menus 183