HP ew2500 802.11b/g Print Server manual End the FTP session, Commands, Command Description

End the FTP session

To end an FTP session, type quit or bye.

NOTE: Before ending an FTP session, use a Ctrl C command to close the data connection.

Commands

The following table summarizes the available FTP printing session commands.

Table B-1User commands for HP Jetdirect FTP server

Command	Description
user <Username>	<Username> specifies a user. Any user is accepted and can print to the selected port.
cd <port#>	Select a port number for printing. (On HP Embedded Web Server, only port1 is
	available.)
cd /	Change to the root directory / of the HP Jetdirect FTP server.
quit	Terminate the FTP session with the printer server.
bye
dir	Display the contents of the current directory. If entered in the root directory, a list of
	available printing ports is displayed.
ls
pwd	Display the current directory or the current HP Jetdirect printing port.
put <Filename>	File name (<Filename>) to send to the selected HP Jetdirect print server port (Port 1).
bin	Configure an FTP binary (image) file transfer.
ascii	Configure an FTP ASCII file transfer. HP Jetdirect print servers support only non-print
	format control for character transfers (standard values for spacing and margins are
	used).
Ctrl C	Abort the FTP service command and any transfer of data. The data connection is
	closed.
rhelp remotehelp	Display a list of FTP system commands supported by the print server. (Use rhelp on
	UNIX, or remotehelp on Windows Server 2003 and Server 2008.) These are not user
	commands. User-accessible commands depend on the client's FTP system.)

Use FTP printing 175