HP ew2500 802.11b/g Print Server manual Wireless settings, USB Speed

Table 8-3 USB Printer Information

Message	Description
Device Name	Name of the attached USB printing device, supplied by the manufacturer.
Manufacturer	Manufacturer of the attached printing device.
Serial Number	Manufacturer's serial number for the attached printing device.
Communication Mode	Current USB communication mode:
	● Composite USB Multiple interface (Composite USB) allows simultaneous print,
	scan, and status communications.
	● IEEE 1284.4 IEEE standard protocol for printers and multi-function (All-in-One)
	devices that allows multiple channels of simultaneous print, scan, and status
	communication.
	● MLC Multiple logical channels (HP proprietary) for printers and multi-function (All-
	in-One) devices that allows multiple channels of simultaneous print, scan, and
	status communication.
	● Bidirectional Two-way printer communication, sending print data to the printing
	device and returning status information from the printing device.
	● Unidirectional One-way communication to the printing device.
	● Device not found No connection detected. Check device and cable.
	● Device not supported Connected device is not a printer (for example, a camera).
USB SPEED	(USB 2.0 print servers only.) Auto-negotiated communication speed over the USB
	connection between the print server and the device.
	Full Speed 12 Mbits/sec as specified in the USB v2.0 specifications, compatible with
	USB v1.1 specifications.
	Hi-Speed480 Mbits/sec for USB v2.0 devices only.
	Disconnected USB port not connected.

802.11 Wireless settings

Wireless status, configuration parameters and error messages are listed in Table 8-4 802.11 Wireless settings on page 139.

Table 8-4802.11 Wireless settings

Message	Description
Status	Current state of the HP Jetdirect print server. See Table 8-2 HP Jetdirect Configuration/
	General Information on page 137 for a complete definition.
Model Number	Product number of the HP Jetdirect print server.
Hardware Address	The 12-digit hexadecimal network hardware (MAC) address of the HP Jetdirect print
	server installed in the printer or device. This address is assigned by the manufacturer.
Firmware Version	Firmware revision number of the HP Jetdirect print server currently installed in the
	printer.
Network Connection Mode	The type of network connection: Auto, Wireless, or Wired.

HP Jetdirect configuration page 139