HP ew2500 802.11b/g Print Server manual Tftp Server, Tftp Filename, Hpnp/printer1.cfg, Pri-dns-svr

Table 3-3Telnet Commands and Parameters (continued)

ip	IP address for the print server. For example:
	ip-config manual
	ip 192.168.45.39
	In the example, manual signifies manual configuration and ip sets the IP address on the
	print server.
	To clear the IP address, set the value to 0.0.0.0.
	If you change this IP address, you must use it on the next Telnet connection.
subnet-mask	Identify the network and host portions of an IPv4 address in received messages. For
	example:
	subnet-mask 255.255.255.0
	In the example, 255.255.255.0 is stored on the print server. To clear the subnet IP
	address and disable the mask, set the value to 0.0.0.0.
	NOTE: If the HP Jetdirect print server is configured by DHCP and you manually change
	the subnet mask or the default gateway address, you should also change the print server's
	IP address. This releases the assigned DHCP address back to the DHCP IP address pool.
default-gw	IP address of a default gateway used by the print server. For example:
	default-gw 192.168.40.1
	In the example, 192.168.40.1 is the IP address of the default gateway.
	NOTE: If the HP Jetdirect print server is configured by DHCP and you manually change
	the subnet mask or the default gateway address, you should also change the print server's
	IP address. This releases the assigned DHCP address back to the DHCP IP address pool.
parm-file	Path and file name whose contents are printed each time the print server is turned on.
	Enter up to 64 alphanumeric characters.
Config Server	(Read only.) IP address of the server (such as a BOOTP or DHCP server) that last
	configured the IP address on the HP Jetdirect print server.
TFTP Server	(Read only.) IP address of the TFTP server that provided parameters to the HP Jetdirect
	print server.
TFTP Filename	(Read only.) Path and TFTP filename on the TFTP server. For example:
	hpnp/printer1.cfg
domain-name	Domain name for the device. For example:
	domain-name support.hp.com
	In the example, support.hp.com is assigned as the domain name.
	The domain name does not include the host name, and is not the FQDN (such as
	printer1.support.hp.com).
pri-dns-svr	IP address of the primary DNS server.
sec-dns-svr	IP address of a secondary DNS server to use if the primary DNS server is unavailable.
pri-wins-svr	IP address of the primary WINS server.
sec-wins-svr	IP address of the secondary WINS server.

48 Chapter 3 TCP/IP configuration