HP ew2500 802.11b/g Print Server manual Assessment

IPsec/Firewall

Configure or view the IPsec or Firewall policy for the print server. You can enable or disable IPsec/ Firewall operation on the print server, and configure the default rule for IP packets that are not covered by IPsec/Firewall rules.

Rules that define the IPsec/Firewall policy are configured through an IPsec/Firewall wizard, which is run when you click Add Rules. For more information, see IPsec/Firewall configuration (V.40.xx) on page 105.

Assessment

Use the Assessment tab to verify that the print server attempting connection to network resources is in full compliance with corporate governance policy. You can require that server policy and device configuration changes are current before allowing connection. HP Jetdirect, acting as an assessment client, collects the information and passes it to the assessment server. The assessment server then determines which network resources the client can access.

By default, assessment is enabled and all assessment types are selected.

Item	Description
Enable Assessment	Select the check box to enable assessment. Clear this check
	box to disable assessment. (By default, assessment is
	enabled.)
DHCP	Select the check box to use DHCP as the transport method for
	moving assessment data between the device (client) and the
	assessment server.
802.1x	Select the check box to use 802.1x to transport assessment
	data between the device and the assessment server.
Primary Server	Select the address type (Preconfigured, IPv4, IPv6, or FQDN/
	Host Name), and provide the IP address, FQDN, or Host
	Name, and the port number for the primary assessment
	server. If the primary server is not accessible, the backup
	server is used.
Backup Server	Select the address type, and provide the IP address, FQDN,
	or host name, and the port number for the secondary
	assessment server. The backup server is used if the primary
	server is not accessible.
Check for Assessment Server Policy Changes Every	Enter the number of days (between 1 and 7) to wait before
nn Days	checking the assessment server for corporate governance
	policy changes.
Check for Device Configuration Changes Every nn	Enter the number of hours (between 1 and 24) to wait before
Hours	checking the assessment server for device configuration
	changes.

Networking tab 103