CMOS Setup

SECTION 8

"LPT Port:

Sets the 378 IRQ 7 (default), 278 IRQ 7, or 3BC IRQ 7 address; Auto (automates the port); or Dis- abled (disables the parallel port).

"Parallel Port:

Sets the port type of the parallel port — Bidirec- tional (default), EPP 1.7, EPP 1.9, ECP, FDD, or Disabled.

"NOTE: When the external floppy is attached, this port type is ignored. Once the floppy drive is removed, this type is reset.

"Ethernet:

Enables the on-board ethernet device — Disabled (default) or Enabled.

"NOTE: To connect to another computer, a dock or port expander is required.

Press the [Esc] key to return to the Advanced menu.

"CPU Cache

Enables (default) or disables the level 1 cache mode.

"HDD Write Cache

Enables (default) or disables the hard drive cache.

8-86620 Hand-Held Computer Technical Reference

Page 122
Image 122
Intermec 6620 manual LPT Port, Parallel Port, Ethernet, CPU Cache, HDD Write Cache