Intermec 6620 manual System Configuration, Development Environments, Windows

SECTION 1 Introduction

System Configuration

Note that the following paragraphs apply to the standard configuration for the computer; but keep in mind that it can be configured to meet your specific needs. Additional RAM can be obtained, to bring the total RAM to 48 MB.

The following constitutes the configuration items needed for a minimum development.

"PEN*KEY 6620 Computer, with a minimum of 16 MB of system RAM for Windows.

"The Windows Toolkit for the 6620 Computer.

"Main batteries: at least one.

"Single dock or wall charger.

"The parallel diskette drive to update flash software.

"The parallel floppy disk drive (dock required) or some type of PC Card storage media for transferring files.

Development Environments

Windows 95

The 6620 Computer can run any mouse-aware Windows ap- plication. Note, if the system is using a 40 MB or 80 MB ATA Card for the operating system, the Windows configura- tion provided by Norand Mobile Systems Division is not a full-featured Windows. You may find that files you need have not been included. Add the files if you do need them.

Borland’s C compiler includes a utility called TDUMP. You can run TDUMP on an executable file to display the files or libraries called by the executable.

6620 Hand-Held Computer Technical Reference 1-13