Intermec 6620 manual Reprogramming Flash Memory, Flash /w /fFILENAME.EXE

SECTION 1 Introduction

"There are some files listed in this publication that could be useful for your configuration or application. If you need any of these files, first look in the Tool Kit for them. If not found there, try one of the Product Forums on the Norand Mobile Systems Division BBS. Information about accessing the BBS is on page 1-20.

"Finally, for development purposes you may consider using certain external devices. Keep in mind whether these items are available (or practical) for the applica- tion to use in the field.

Reprogramming Flash Memory

To reflash the BIOS, you must first boot to DOS, either by:

"pressing [Shift] + <F5> during the Windows 95 boot process; or

"booting to a floppy or ATA drive.

Then, from the DOS prompt, run FLASH.EXE as follows:

FLASH /w /fFILENAME.EXE

/w specifies to overwrite the flash.

/fFILENAME specifies the file to write to the flash

Or, use the UPDTROM.BAT batch file that can be found in the /ROM subdirectory on the Recovery CD.

6620 Hand-Held Computer Technical Reference 1-11