Intermec 6620 manual Scanner, Reset to Default Settings, Decode Data Packet Format

SECTION 1 Introduction

Scanner

The 6620 Computer can be ordered with either a standard or long-range, 5-volt laser internal scanner. This computer also supports tethered (external) CCD, wand, and laser scanners.

Note that internal scanners must be initialized before being used. Use the following two bar codes to initialize the inter- nal scanner with the default parameters:

"Reset to Default Settings

Scanning this bar code returns all parameters to their original values.

RESET TO DEFAULT SETTINGS

"Decode Data Packet Format

Select this option after you scan the Reset To De- fault Settings bar code. This is necessary for the computer to receive any decodes.

SEND PACKETED DECODE DATA

See the SE 1223 Integrated Scanner User’s Guide (P/N: 961-032-042) for additional information.

6620 Hand-Held Computer Technical Reference 1-7