Intermec 6620 manual Recovering from Parallel CD-ROM, Use Windows Explorer to find the CD

SECTION 3 6620 Recovery Procedures

Recovering from Parallel CD-ROM

Load “Recovery Windows,” then eject and reinsert the 6620 Recovery CD-ROM. If the CD-ROM fails to AutoPlay, do the following to manually start the recovery procedures:

a.Use “Windows Explorer” to find the CD.

b.Click the right mouse button on the CD and click the AutoPlay button. The “Recovery/Re-Image Utility” window appears (page 3-6).

1.Select Image the Main Data Partition, then click the Continue button to continue.

2.Click the OK button on the “Recovery Utility” warn- ing, if it is displayed (page 3-7), to continue. Use the applicable Browse buttons to ensure the correct CD- ROM drive (Source volume) is selected, and the Des- tination volume is the drive assigned to the “Main Data” partition via the “Image the Main Load” page (page 3-8).

3.Click the Image Main Load button to continue. The drive will be formatted and loaded with a “Full Load” of Windows 95.

4.When done, click the Finish button to exit the “Recov- ery Utility” window, then exit Windows. The “Main Data” partition restores the 6620 Computer to normal.

After entering your name (and optionally, your company name), and accepting the license agreement, Windows prompts you for your Certificate of Authenticity from Micro- soft as it starts. This is necessary to continue the recovery.

6620 Hand-Held Computer Technical Reference 3-9