Intermec 6620 manual Activating the Recovery Windows Partition, Recovering from Network Drive

SECTION 3 6620 Recovery Procedures

Activating the Recovery Windows

Partition

"NOTE: Steps 1–3 are not needed if you are in the middle of a Complete System Recovery with “Recovery Windows” already activated.

1.Boot the 6620 Computer with the 6620 Emergency Re- covery Disk. The computer should be docked with the parallel disk drive connected. Let the “Automation Utility” start.

2.Press “2” to activate “Recovery Windows.”

3.When prompted, eject the disk to boot to the recovery partition. The computer boots from the hard drive.

Actual Recovery of the Main Data

Partition

Recovering from Network Drive

"NOTE: Preparing a network share and ensuring the network transports and drivers are installed properly on the remote system is beyond the scope of this document.

On the Remote Machine

Insert the 6620 Toolkit CD. Ensure that the CD drive is shared and note the Share name.

On the 6620 Computer to be Recovered

Ensure that the Ethernet card is enabled in the BIOS Set- up, advanced options, integrated peripherals.

1.Restart “Recovery Windows” and log in.

2.On newer systems, double-click a “Recover” icon (shown left) from the Windows desktop. If there is a prompt mentioning an existing drive, press “Y” for yes, then press [Enter].

If your system does not have this icon, find the remote share and mount it as drive Z.

6620 Hand-Held Computer Technical Reference 3-5