MX240 Ethernet Services Router Hardware Guide
To install the mounting shelf on the front rails of a
1.If needed, install cage nuts in the holes specified in Table 22 on page 41.
2.On the back of each rack rail, partially insert a mounting screw into the lowest hole specified in Table 22 on page 41.
3.Install the mounting shelf on the back of the rack rails. Rest the bottom slot of each flange on a mounting screw.
4.Partially insert the remaining screws into the open holes in each flange of the mounting shelf (see Figure 23 on page 42 or Figure 24 on page 43).
5.Tighten all the screws completely.
Figure 23: Installing the Front Mounting Hardware for a Four-Post Rack or Cabinet
42■ Installing the Mounting Hardware for a Rack or Cabinet
