Juniper Networks MX240 Maintaining the Host Subsystem, User@host show chassis routing-engine

MX240 Ethernet Services Router Hardware Guide

Maintaining the Host Subsystem

The host subsystem comprises an SCB and a Routing Engine installed into a slot in the SCB. To maintain the host subsystem components, follow these guidelines:

■Check the LEDs on the craft interface to view information about the status of the Routing Engines. For more information about the LEDs, see “Craft Interface” on page 17.

■Check the LEDs on the SCB faceplate (see Table 9 on page 13).

■Check the LEDs on the Routing Engine faceplate (see Table 10 on page 16).

■To check the status of the Routing Engines, issue the show chassis routing-enginecommand. The output is similar to the following:

user@host> show chassis routing-engine

Routing Engine status:
Slot 0:
Current state		Master
Election priority		Master (default)
Temperature	45	degrees	C / 113 degrees F
CPU temperature	43	degrees	C / 109 degrees F
DRAM	2048	MB
Memory utilization	15	percent
CPU utilization:
User	0	percent
Background	0	percent
Kernel	8	percent
Interrupt	0	percent
Idle	92	percent
Model		RE-S-1300
Serial ID		1000694968
Start time		2007-07-10 12:27:39 PDT
Uptime		1 hour,	40 minutes, 37 seconds
Load averages:		1 minute	5 minute	15 minute
		0.11	0.06	0.01
Routing Engine status:
Slot 1:
Current state		Backup
Election priority		Backup (default)
Temperature	46	degrees	C / 114 degrees F
CPU temperature	42	degrees	C / 107 degrees F
DRAM	2048	MB
Memory utilization	13	percent
CPU utilization:
User	0	percent
Background	0	percent
Kernel	0	percent
Interrupt	0	percent
Idle	100	percent
Model		RE-S-1300
Serial ID		1000694976
Start time		2007-06-19 14:17:00 PDT
Uptime	20 days, 23 hours, 51 minutes, 4 seconds

70■ Maintaining the Host Subsystem