Juniper Networks MX240 manual To check the status of the SCB, use the CLI command

Chapter 13: Replacing Hardware Components

To check the status of the SCB, use the CLI command:

user@host> show chassis environment cb

CB 0 status:
State		Online Master
Temperature		25 degrees C / 77 degrees F
Power	1
1.2	V	1198	mV
1.5	V	1508	mV
1.8	V	1830	mV
2.5	V	5059	mV
3.3	V	6593	mV
5.0	V	5111	mV
12.0 V		12181	mV
1.25 V		1250	mV
3.3	V SM3	6587	mV
5 V	RE	5078	mV
12 V RE		12026	mV
Power	2
11.3 V bias PEM		11253	mV
4.6	V bias MidPlane	4827	mV
11.3 V bias FPD		11408	mV
11.3 V bias POE 0		11446	mV
11.3 V bias POE 1		11408	mV
Bus Revision		6
FPGA Revision		0
CB 1 status:
State		Online Standby
Temperature		26 degrees C / 78 degrees F
Power	1
1.2	V	1211	mV
1.5	V	1517	mV
1.8	V	1817	mV
2.5	V	2507	mV
3.3	V	3312	mV
5.0	V	5136	mV
12.0 V		12142	mV
1.25 V		1260	mV
3.3	V SM3	3306	mV
5 V	RE	5085	mV
12 V RE		11968	mV
Power	2
11.3 V bias PEM		11369	mV
4.6	V bias MidPlane	4814	mV
11.3 V bias FPD		11427	mV
11.3 V bias POE 0		11350	mV
11.3 V bias POE 1		11330	mV
Bus Revision		39
FPGA Revision		1

Replacing Host Subsystem Components ■ 101