FB600
Short description
The electronics assembly has the following functions:
•Total kilometres are saved
•Last training is saved
•Presetting is saved
•Pulse display without training possible
•Switch between kilometres and miles
Function range
The four buttons will be described in short below.
DISP (press shortly)
•Switches from time display to ready for training
•Stops or starts display change.
•Switches to next input range.
Settings or values will be accepted.
DISP (press longer) RESET
• Deletes display for a reset. Only possible in standstill..
Minus – / Plus +
With these function buttons, you can change the values in the different input data before the start of the training
•Press longer > fast run through the values
•Press “Plus” and “Minus” together: input data will be reset )
Minus – (press shortly when time is displayed)
•Display of last training data (MEM) and total kilometres (ODO))
Minus – (press longer when time is displayed)
• Set time (TIME)
• Switch from ME to IM (SETTINGS)
ME = [24h], [KJoule], [kilometres]
Plus + (press longer)
• Recall of training presetting
REC (recovery pulse with fitness mark)
By pressing this function button, the recovery pulse functi- on is started and a fitness grade is calculated.
Measuring the pulse
The measurement of the pulse can be carried out by means of 3 sources:
1. Ear clip -
The plug is put into the socket.
2.Hand pulse
The connection is situated at the back of the display;
3 Breast belt with plug recipient (available as accessory) Please observe the respective instructions.
13 GB
