Kettler FB600 manual Training without presetting / Pulse mea- surement, Training with presetting

FB600

Training

1. Training without presetting / Pulse mea- surement

•press DISP

Training time “EX.TIME” will be displayed.

or

Pulse value will be displayed if a pulse signal is identified via ear clip, hand pulse or plug recipient.

and / or

• Start pedalling

Training time “EX.TIME” and the following displays will be increasingly displayed.

Change of display is active Animation wheel is active

2. Training with presetting

Presetting values can be entered for time, distance and energy. With start of training, such entered values will count down. If zero is reached, the display will flash and a signal will sound. Then, the presetting value will conti- nue to count up. When switch display mode is active, the range will be displayed which will reach zero first. A value can be entered for pulse which will sound an alarm signal as soon as reached.

• Press longer Plus Display: “TIME” presetting

Time setting (EX.TIME)

•Enter values using “Plus” or “Minus” (e.g. 30:00)

•Confirm with “DISP”.

Display: next setting ”DISTANCE”

Distance setting (DIST)

•Enter values using “Plus” or “Minus” (e.g. 780)

•Confirm with “DISP”.

Display: next setting “ENERGY”

Energy setting (KJOULE or KCAL)

• Enter values using “Plus” or “Minus” (e.g. 780)

• Confirm with “DISP”. Display: next setting “age input“

Pulse monitoring with alarm signal

• Enter value using “Plus” or “Minus” (e.g. 131)

• Confirm with “DISP” (presetting mode completed) Display: ready for training with time setting

•Pedalling ill start the training

Presetting values displayed will count down. Change of display is active

Animation wheel is active

Note:

• Pressing “DISP” will stop and start change of display.

•The presetting symbol will be hidden if all presetting is counted down to zero.

•The presetting will be saved and will be re-display- ed with the next training.

17 GB