Chapter 7

Using the Network Scanner Features

7

Using the Network Scanner Features

To deselect the Name, press the selected Name again.

If you input a destination manually, refer to "When an FTP server is Input Manually" on Page 7-17.

7 Press the [Scanner Setting] key.

The Scanner Setting Basic screen appears.

8 Configure the necessary items.

For more information on the configurations on the Scanner Setting Basic screen, refer to "About the Scanner Setting Basic Screen" on Page 7-26.

9 Set an original and press the [Start] button.

The original is scanned, and the scanned data are sent to an spec- ified destination.

The Reserved JOB Confirmation screen appears.

10 To send another scanned data, press the [Yes] key. To finish the scanning, press the [No] key.

Pressing the [Yes] key brings you back to the Scanner Set- ting Basic screen. Return to step 8 and repeat the proce- dures.

7-16

bizhub PRO 1050/1050e Scanner

Page 129
Image 129
Konica Minolta 1050E appendix Chapter