Kramer Electronics Revision 6 manual Device Settings Tab, Connect Dialog Box

Tab Area Settings

5.2The Device Settings Tab

Device setting readout is possible with standalone room controllers and K-NET Master RC or Aux K-NET devices connected with a K-NET cable to their Master RC, as defined in the Room Control tree. Figure 40 shows the device settings tab:

Figure 40: The Device Settings Tab

1.Click Connect To Device:

The Connect window appears (see Figure 41).

2.Select the connection method to the standalone controller or Master RC.

Table 6: Connect Dialog Box

Feature	Function
Connection	Check to select the connection to the device via the Ethernet, USB or
Method Area	Serial port
Ethernet Area	IP: Type the IP address of the device to which you want to connect.
	Port: shows the port number.
	Factory Default Address Button: Click to reset the IP address to its
	default value
USB Area	Port: select the communication USB port.
	Refresh Ports: click to check if there are ports ready to connect on the
	Kramer device
Serial	Select Port: select the communication port

Figure 41: Device Selection Dialog Box

Figure 42 and Table 7 define the device settings after connecting to the device1:

Figure 42: The Device Settings Tab (Device with Time Server Options Connected)

1 The actual visible settings change according to the device

24 KRAMER: SIMPLE CREATIVE TECHNOLOGY